Implementation of Internet of Things in Making Smart Trash Bins Case Study Paud Elevate Mbatakapidu

Rambu Dewi Ana Wenju; Pingky Alfa Ray Leo Lede

doi:10.59934/jaiea.v4i3.1191

Authors

Rambu Dewi Ana Wenju Universitas Kristen Wira Wacana Sumba
Pingky Alfa Ray Leo Lede Universitas Kristen Wira Wacana Sumba

DOI:

https://doi.org/10.59934/jaiea.v4i3.1191

Keywords:

Sorting Trash, IoT Technology, Early Childhood, Place Rubbish Automatic

Abstract

Problem Garbage in Waingapu City, East Sumba, is increasing Serious consequence stacking and mixing trash that is not classified based on types in some locations, such as the Inpres Market, and several place tourism around Waingapu City. Lack of awareness public For throw away trash in its place and facilities limited transportation give impact negative on the environment including pollution land, water and air. Research This aiming For test accuracy IoT technology in classify rubbish organic and inorganic as well as detecting waste volume on prototype place the trash that will created. PAUD Elevate Mbatakapidu made into as location research and testing accuracy place waste. This research has been successfully designed place rubbish clever IoT based which can sorting rubbish organic and inorganic using capacitive proximity sensors and inductive proximity sensors which are then separated using servo motor. Place rubbish this can also monitor the volume of waste at the site rubbish use application blynk . In an experiment conducted by researchers happen error in sorting rubbish organic by 20%, sorting rubbish inorganic by 40%. For monitoring of waste volume at the site rubbish organic 100% successful while place rubbish inorganic No succeed.

Downloads

Download data is not yet available.

References

Abilovani, ZB, Yahya, W., & Bakhtiar, FA (2018). Implementation of MQTT Protocol for IoT Device Monitoring System. Journal of Information Technology and Computer Science Development (J-PTIIK) , 2 (12), 7521–7527. http://j-ptiik.ub.ac.id

Akbar, M., Anjasmara, SD, & Wardhani, KDK (2021). Design and Construction of Organic and Inorganic Waste Detection Devices Using Proximity Sensors and NodeMCU ESP8266. Applied Computer Journal , 7 (2), 290–299. https://doi.org/10.35143/jkt.v7i2.5178

Ashton, K. (2010). The 'Internet of Things' Thing . 4986.

Bahtiar, Y., Ariyanto, D., Taufik, M., & Handayani, T. (2019). Organic Sorter with Integrated Infrared Sensor of Inductive and Capacitive Sensors. EECCIS Journal , 13 (3), 109–113.

Damanhuri, E., & Padmi, T. (2010). Waste Management. Journal of Environmental Engineering , 3 (2), 7.

Febryanti, Y., Wibowo, FM, & Zafia, A. (2022). Smart Trash Bin Monitoring System at the Plant and Plant Conservation Research Center . 8106 , 81–90. https://doi.org/10.20895/INISTA.V4I1

Hasrul, R., Adnan, HA, Bhaswara, AD, & Atsir, MA (2021). Design and Build a Smart Toilet Prototype Based on Wemos D1R1 Connected to Android. ScienceETIn Journal , 5 (2), 51–59. https://journal.unilak.ac.id/index.php/SainETIn/index 51

Herlina, A., Syahbana, MI, Gunawan, MA, & Rizqi, MM (2022). Iot-Based Lighting Control System Using Blynk 2.0 Application With Nodemcu Esp8266 Module. INSANtek , 3 (2), 61–66. https://doi.org/10.31294/instk.v3i2.1532

Meyrena, SD, & Amelia, R. (2020). Analysis of the Utilization of Plastic Waste into Ecopaving as an Effort to Reduce Waste. Indonesian Journal of Conservation , 9 (2), 96–100. https://doi.org/10.15294/ijc.v9i2.27549

Priyatna, AT, & Basry, A. (2021). Prototype of Automatic Water Gate Control System Using Arduino Uno. Tekinfo: Journal of Industrial Engineering and Informatics Engineering , 22 (2), 1–14. https://doi.org/10.37817/tekinfo.v22i2.1739

Sari, N., Rahmayanti, H., & Sumargo, B. (2023). Selection of Waste Processing Priorities in the Perspective of Community Knowledge for Emission Reduction. Engineering , 16 (3), 345–350. https://journal.trunojoyo.ac.id/teknik/article/view/22643%0Ahttps://journal.trunojoyo.ac.id/teknik/article/download/22643/8978

Somantri, Yustiana, I., Iklima, LD, & Syahputra, HH (2023). Design and Construction of Organic and Non-Organic Waste Bins Based on IoT and Mobile Applications. 15 (2), 3176–3188.

Sukarjadi, S., Arifiyanto, A., Setiawan, DT, & Hatta, M. (2017). Design and Making of Smart Trash Bin at Maarif Hasyim Latif University. Teknika: Engineering and Science Journal , 1 (2), 101. https://doi.org/10.51804/tesj.v1i2.123.101-110

Syaljumairi, R., Prabowo, C., & Latiffah Hanum, D. (2023). IoT-Based Smart Trash Can. JITSI: Scientific Journal of Information Systems Technology , 4 (1), 8–15. https://doi.org/10.30630/jitsi.4.1.103

Taufiq, A., & Maulana, MF (2015). Socialization of Organic and Non-Organic Waste and Waste Creation Training. Innovation and Entrepreneurship , 4 (1), 68–73.

Widodo, YB, Sutabri, T., & Faturahman, L. (2019). Smart Trash Can With IOT-Based Notification. Journal of Informatics and Computer Technology , 5 (2), 50–57. https://doi.org/10.37012/jtik.v5i2.175