IoT-Enabled Automatic Sugar Filling Device with  Weight-Based Control

Fadel Muhammad; Iskandar Lutfi; A. Rahman

doi:10.59934/jaiea.v5i1.1222

Authors

Fadel Muhammad Politeknik negeri sriwijaya
Iskandar Lutfi Politeknik Negeri Sriwijaya
A. Rahman Politeknik Negeri Sriwijaya

DOI:

https://doi.org/10.59934/jaiea.v5i1.1222

Keywords:

Automation, IoT, ESP32, load cell, sugar filling, Blynk

Abstract

In the era of Industry 4.0, efficiency and automation in production processes have become essential, particularly in the food sector. Manual
sugar filling processes have several limitations, such as inaccurate measurements and reliance on human labor. Therefore, this study
developed an automated sugar filling system based on the Internet of Things (IoT) with selectable doses of 500 grams, and 1 kilogram.
The system is designed using an ESP32 microcontroller, a load cell sensor integrated with the HX711 module, servo and DC motors, as
well as infrared and ultrasonic sensors. The device’s data can be monitored in real time via the Blynk application on a mobile device.
Testing results show that the system is capable of automatically dispensing sugar with high accuracy and can notify users when the sugar
stock in the hopper is low. This system is expected to enhance the efficiency and effectiveness of sugar filling processes, particularly for
small-scale industries or household applications.

Downloads

Download data is not yet available.

References

I. Pratama, B. Purnomo, and A. W. Yahya, “Rancang Bangun Pengisian Gula Pasir Otomatis Menggunakan Sensor Load Cell

Berbasis Arduino Berdasarkan Berat Dan Volume,” J. Tek. Elektro, vol. 7, no. 2, p. 45, 2023, doi: 10.31000/jte.v7i2.9802.

A. Uno and G. Pasir, “BERBASIS ARDUINO UNO DESIGN OF ARDUINO UNO BASED MEASUREMENT AND PACKAGING DEVICE OF SUGAR PENDAHULUAN Proses penakaran dengan cara manual , yaitu memasukkan produk ke dalam kemasan lalu ditimbang . Jika berat kurang dari berat bersih produk , maka akan d,” vol. 1, no. 1, pp. 1–11, 2023.

“BERDASARKAN MASSA DAN VOLUME MENGGUNAKAN SENSOR LOAD CELL BERBASIS ARDUINO MEGA 2560 KHOIRUL IMAN Skripsi Ini Ditulis Untuk Memenuhi Sebagian Persyaratan Dalam Memperoleh Gelar Sarjana Pendidikan PROGRAM STUDI PENDIDIKAN TEKNIK ELEKTRONIKA,” vol. M, 2017.

A. Ahmad, A. H. S. T, and P. S. W. S. T, “Kantong Plastik Berbasis,” 2012, [Online]. Available: http://repo.pens.ac.id/1292/1/paper_TA.pdf

I. Pratama, B. Purnomo, and A. W. Yahya, “Rancang Bangun Pengisian Gula Pasir Otomatis Menggunakan Sensor Load Cell Berbasis Arduino Berdasarkan Berat Dan Volume,” J. Tek. Elektro, vol. 7, no. 2, p. 45, 2023, doi: 10.31000/jte.v7i2.9802.

A. Uno and G. Pasir, “BERBASIS ARDUINO UNO DESIGN OF ARDUINO UNO BASED MEASUREMENT AND PACKAGING DEVICE OF SUGAR PENDAHULUAN Proses penakaran dengan cara manual , yaitu memasukkan produk ke dalam kemasan lalu ditimbang . Jika berat kurang dari berat bersih produk , maka akan d,” vol. 1, no. 1, pp. 1–11, 2023.

A. Fattulah, S. Rahman, and I. Lubis, “Paper Prototype Mesin Penakar Gula Pasir Berbasir Ardiuno Uno Pada UMKM,” Snastikom, vol. 2, no. 1, pp. 29–40, 2023.

S. Ardhi and T. P. Gunawan, “Prototipe Pengisian Gula Pasir Dengan Screw Conveyor Dilengkapi Kalibrasi Timbangan Berat Metode CSIRO Dan Teknologi RFID Programmable Serta Datalogger,” vol. 25, no. 1, pp. 1–17, 2022.

A. Ahmad, A. H. S. T, and P. S. W. S. T, “Kantong Plastik Berbasis,” 2012, [Online]. Available: http://repo.pens.ac.id/1292/1/paper_TA.pdf

T. Mulyo, E. S. Rahayu, and E. W. Riptanti, “Pengaruh Ekuitas Merek dan Atribut Produk terhadap Keputusan Pembelian Konsumen Gula Pasir di Pasar Swalayan Kota Surakarta,” Agric. Socio-Economic Empower. Agribus. J., vol. 1, no. 1, p. 10, 2022, doi: 10.20961/agrisema.v1i1.61912.

Jusdi, A. Candra, and N. Syam, “AMMATOA : Journal System Information And Computer Institut Teknologi Dan Bisnis Bina Adinata RANCANG BANGUN SMART ROOM MENGGUNAKAN VOICE RECOGNITION BERBASIS,” Amm. Syst. Inf. Comput., vol. 1, no. 1, pp. 35–46, 2023.

E. Damayanti and A. Saptaji, “Penerapan load cell pada mesin penggoreng kerupuk otomatis berbasis arduino UNO dan PLC,” Tedc, vol. 18, no. 1, pp. 67–76, 2024.

Y. Mukhammad, A. Santika, and S. Haryuni, “Analisis Akurasi Modul Amplifier HX711 untuk Timbangan Bayi,” Med. Tek. J. Tek. Elektromedik Indones., vol. 4, no. 1, pp. 24–28, 2022, doi: 10.18196/mt.v4i1.15148.

R. G. Paramananda, H. Fitriyah, and B. H. Prasetio, “Rancang Bangun Sistem Penghitung Jumlah Orang Melewati Pintu menggunakan Sensor Infrared dan Klasifikasi Bayes,” J. Pengemb. Teknol. Inf. dan Ilmu Komput. Univ. Brawijaya, vol. 1, no. 3, pp. 921–929, 2018.