Development of a 3D Model of the STMIK TIME  Campus Building Using the Photogrammetry Metho

Felix Lie; Didik Aryanto; Leony Hoki

doi:10.59934/jaiea.v5i1.1621

Authors

Felix Lie STMIK TIME
Didik Aryanto STMIK Time
Leony Hoki STMIK Time

DOI:

https://doi.org/10.59934/jaiea.v5i1.1621

Keywords:

Photogrammetry, 3D Model, Architectural Modeling

Abstract

Photogrammetry is a mapping method that utilizes photographic images to generate three-dimensional (3D) models. In this study, the photogrammetry method is used to create a 3D model of the STMIK TIME campus buildings to document and visualize the structures digitally. The process of creating the 3D model begins with image acquisition using a digital camera, followed by processing with photogrammetry software to generate point clouds, meshes, and textured models. The final result of this research is a 3D model of the STMIK TIME campus, which can be used for various purposes such as architectural planning, building preservation, and visual simulation. Based on the evaluation conducted, the resulting 3D model demonstrates a high level of accuracy in representing the actual building structure. Thus, the photogrammetry method has proven to be an effective technique for creating 3D building models at a more affordable cost compared to conventional 3D modeling techniques.

Downloads

Download data is not yet available.

References

D. Darmoyo, “Pembuatan Film Pendek Berjudul ‘Jangan Menyerah’ Dengan Menggunakan Kamera Smarphone,” J. Inf. Syst. Technol. (JOINT); Vol 1 No 1 J. Inf. Syst. Technol. (JOINT)DO - 10.37253/joint.v1i1.1373 , vol. 08, no. 08, pp. 80–86, 2020, [Online]. Available: https://journal.uib.ac.id/index.php/joint/article/view/1373

A. Sevtiana, G. T. Saputra, and D. Wisata, “Perancangan Video Animasi Edukatif Perubahan Energi Pada Siswa Kelas Tiga Sekolah Dasar,” J. Digit, vol. 9, no. 2, p. 178, 2020, doi: 10.51920/jd.v9i2.118.

G. V. Herman et al., “3D Modeling of the Cultural Heritage: Between Opportunity and Necessity,” J. Appl. Eng. Sci., vol. 10, no. 1, pp. 27–30, 2020, doi: 10.2478/jaes-2020-0005.

N. M. Y. Budhyowati, “Desain Selubung Bangunan Untuk Bangunan Hemat Energi,” J. Tek. Sipil Terap., vol. 3, no. 2, p. 57, 2021, doi: 10.47600/jtst.v3i2.292.

E. Ardiana and E. Vidya Putra, “Organisasi Eksternal Kampus Sebagai Wadah Pengembangan SoftskillMahasiswa(Studi Kasus : Mahasiswa Universitas Negeri Padang Yang Mengikuti Organisasi Eksternal Kampus),” J. Perspekt., vol. 2, no. 3, p. 274, 2019, [Online]. Available: http://perspektif.ppj.unp.ac.id/index.php/perspektif/article/view/100

E. Triandini, S. Jayanatha, A. Indrawan, G. Werla Putra, and B. Iswara, “Metode Systematic Literature Review untuk Identifikasi Platform dan Metode Pengembangan Sistem Informasi di Indonesia,” Indones. J. Inf. Syst., vol. 1, no. 2, p. 63, 2019, doi: 10.24002/ijis.v1i2.1916.

T. Jaringan, A. Surahman, A. D. Wahyudi, A. D. Putra, S. Sintaro, and I. Pangestu, “InfoTekJar : Jurnal Nasional Informatika dan Perbandingan Kualitas 3D Objek Tugu Budaya Saibatin Berdasarkan Posisi Gambar Fotogrametri Jarak Dekat,” InfoTekJar J. …, vol. 2, 2021, [Online]. Available: https://jurnal.uisu.ac.id/index.php/infotekjar/article/view/3305

Y. Rahmanto, “Digitalisasi Artefak pada Museum Lampung Menggunakan Teknik Fotogrametri Jarak Dekat untuk Pemodelan Artefak 3D,” J. CoreIT J. Has. Penelit. Ilmu Komput. dan Teknol. Inf., vol. 7, no. 1, p. 7, 2021, doi: 10.24014/coreit.v7i1.10501.