Design Of An LPG Leak Detection System Using Iot Based MQ-2 Sensor
DOI:
https://doi.org/10.59934/jaiea.v3i1.337Keywords:
LPG gas leak detection, MQ-2 sensors Nodemcu Esp8266, Aruino IDE, IoTAbstract
The IoT-based LPG gas leak detection system with MQ-2 and automatic regulator aperture is designed to protect the environment from the dangers of gas leaks and optimize gas use. The MQ-2 sensor is used to detect LPG gas accurately and sensitively. This system is connected to IoT which allows remote monitoring via smart devices. When the sensor detects that the LPG gas concentration exceeds a safe threshold, the system will send an alert with notification and automatically activate the regulator to cut off the gas supply. This helps prevent the accumulation of harmful gases. This design combines reliable gas detection with automatic operation to improve environmental safety and gas efficiency. LPG gas is very commonly used by the community because it has many advantages, but there are also many risks associated with using LPG gas, such as poisoning, shortness of breath and even fire. It is therefore important to have a leak detection system to prevent accidents that may occur, by integrating the programmable MQ-2 sensor and NoteMCU ESP8266.
Downloads
References
R. Inggi and J. Pangala, “Design of an Lpg Gas Leak Detection Tool Using the Arduino Based Mq-2 Sensor - Perancangan Alat Pendeteksi Kebocoran Gas LPG Menggunakan Sensor MQ-2 Berbasis Arduino,” Simkom, vol. 6, no. 1, pp. 12–22, 2021.
A. P. Manullang, Y. Saragih, and R. Hidayat, “Implementasi Nodemcu Esp8266 Dalam Rancang Bangun Sistem Keamanan Sepeda Motor Berbasis Iot,” JIRE (Jurnal Inform. Rekayasa Elektron. , vol. 4, no. 2, pp. 163–170, 2021, [Online]. Available: http://e-journal.stmiklombok.ac.id/index.php/jireISSN.2620-6900
T. Suryana, “Implementasi Modul Sensor MQ2 Untuk Mendeteksi Adanya Polutan Gas di Udara,” J. Komputa Unikom, pp. 1–15, 2021, [Online]. Available: http://iot.ciwaruga.com
A. Mandagi and S. Immanuel, “PENGGUNAAN SENSOR GAS MQ-2 SEBAGAI PENDETEKSI ASAP ROKOK (MQ-2 Smoke Detector),” J. Tek. dan Ilmu Komput., vol. 3, no. 9, pp. 1–7, 2014.
D. Fina Supegina, “Perancangan Robot Pencapit Untuk Penyotir Barang Berdasarkan Warna Led Rgb Dengan Display Lcd Berbasis Arduino Uno,” J. Tek. Elektro, vol. 5, no. 1, pp. 9–17, 2016.
R. Karim, S. S. Sumendap, and F. V. I. . Koagouw, “Pentingnya Penggunaan Jaringan Wi-Fi dalam Memenuhi Kebutuhan Informasi Pemustaka pada Kantor Perpustakaan dan Kearsipan Daerah Kota Tidore Kepulauan,” J. “Acta Diurna,” vol. 5, no. 2, p. 2, 2016.
A. D. Pangestu, F. Ardianto, and B. Alfaresi, “Sistem Monitoring Beban Listrik Berbasis Arduino Nodemcu Esp8266,” J. Ampere, vol. 4, no. 1, p. 187, 2019, doi: 10.31851/ampere.v4i1.2745.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Journal of Artificial Intelligence and Engineering Applications (JAIEA)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
