Analysis of Factors Causing Work Accidents in Steel Plate Production with FTA and PDCA Methods at PT. XYZ

M. H. N. Islamsyah; Rizqi Novita Sari

doi:10.59934/jaiea.v4i2.821

Authors

M. H. N. Islamsyah UPN Veteran Jawa Timur
Rizqi Novita Sari UPN Veteran Jawa Timur

DOI:

https://doi.org/10.59934/jaiea.v4i2.821

Keywords:

FTA, K3, PDCA, Safety factor

Abstract

The identification of work accidents in the steel plate production process poses a serious risk to workers and disrupts operational activities. This research analyzes the factors causing work accidents at PT XYZ in the steel plate production process using the Fault Tree Analysis (FTA) method and the Plan-Do-Check-Act (PDCA) method. FTA is applied to identify and decipher the root causes of accidents, while PDCA serves as a framework for continuous improvement. Data were collected through accident reports, observations. The results showed that human error, including being pinched by a plate, hit by a ganco, and exposed to sparks were the main contributors to the occurrence of accidents. Through the PDCA cycle, several preventive measures were proposed, including enhancing worker training, improving equipment maintenance, and strengthening safety protocols. This study provides actionable insights to improve workplace safety and reduce the risk of accidents in the steel plate production process.

Downloads

Download data is not yet available.

References

Fauziah, S. R., & Renosori, P. Identifikasi penyebab terjadinya kecacatan pada produk induktor toroidal dengan menggunakan metode fault tree analysis (FTA) di CV. Cipta Karya Mandiri. In Bandung Conference Series: Industrial Engineering Science (Vol. 2, No. 1, pp. 91-99), 2022

Isniah, S., Purba, H. H., & Debora, F. Plan do check action (PDCA) method: literature review and research issues. Jurnal Sistem dan Manajemen Industri, 4(1), 72-81, 2020

Kusnendar, A. R., & Herwanto, D. Analisis penerapan keselamatan dan kesehatan kerja (k3) dengan metode fault tree analysis (fta) guna meningkatkan produktivitas kerja di pt. Ciptaunggul karya abadi. Jurnal Ilmiah Wahana Pendidikan, 8(11), 365-378, 2022

Maulana, M. R., Fatmawati, W., & Bernadhi, B. D. Analisis pengendalian kualitas produk cacat dengan metode plan, do, check, action (pdca). Jurnal Logistica, 1(1), 30-38, 2022

Melani, Y. I., & Mahmud, M. Penilaian resiko pada sistem monitoring kegiatan belajar mengajar di perguruan tinggi swasta. JURTEKSI (Jurnal Teknologi dan Sistem Informasi), 7(1), 23-32, 2020

Nuryono, A., Kurnia, H., Tambunan, E. B., & Wiyatno, T. N. Analisis kinerja keselamatan dan kesehatan kerja (k3) pada proses produksi saus dengan metode fault tree analysis. J. Ilm. Tek. Ind, 11(2), 141-154, 2023

Ramadhan, R. M., & Suseno, A. Analisis pengendalian risiko kecelakaan kerja menggunakan metode hirarc pada area produksi CV. Artana Engineering. TEKNIKA: Jurnal Ilmiah Bidang Ilmu Rekayasa, 15(1), 115-130, 2021

Suhartoko, C., & Mas' ud, M. I. Implementasi k3 dalam meningkatkan produktivitas kerja dengan pendekatan fault tree analysis di PT SA. Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, 1(3), 115-125, 2021

Syarifuddin, S., Anwar, A., & Indori, P. Analisis kesehatan dan kecelakaan kerja dengan metode fault tree analysis (fta) pada area stasiun pengumpul di pt pertamina ep asset 1 rantau field. Industrial Engineering Journal, 9(2), 2020

Yunan, A., Raya, D., & Rosihan, R. I. Analisis upaya menurunkan cacat produk crank case lh pada proses die casting dengan metode pdca dan fmea di pt. Suzuki indo mobil/motor. Journal of Industrial and Engineering System, 1(1), 1-10, 2020

Yunitasari, E. W. Perbaikan sistem belajar mahasiswa pada mata kuliah statistik industri dengan metode plan do check action (PDCA). IEJST (Industrial Engineering Journal of The University of Sarjanawiyata Tamansiswa), 3(2), 2019